CFRP

code description application

mix ratio

[pbv]

Geltime

[min]

Hardness

[shore]

Tg

[°C]

tech data
EP1401 Two-component low viscosity epoxy resin, to be used as a primer or impregnating agent / adhesive in CFRP systems. Primer for structural reinforcement of reinforced concrete structures and masonry  100 : 50  30 70 D  72
EP1402 Two-component thixotropic epoxy resin, to be used as an impregnating agent / adhesive in CFRP systems. Impregnating agent for carbon tapes and fibers for vertical application.  100 : 40 35  70 D  72 
EP1403

Two-component, thixotropic, thickened epoxy filler / smoothing compound, does not drip from vertical surfaces and ceilings.

Smoothing compound, grouting of surface roughness in cls.

 100 : 40 60 80 D 71

Flooring

code description application color

mix ratio

[pbw]

potlife

[mins]

hardness

[shore_D]

tech data sheet
EP1001  Two-component epoxy primer that can be diluted with water. Pretreatment of cement substrates whitish   40:75 60-90  84  
EP1006 Epoxy primer characterized by water rpellency, resistance to acids, alkalis and moisture. Primer for self-leveling EP1050.

Pretreatment of cement substrates

 straw  100:55  60  -  
EP1043 Self-leveling system with superior quality, transparent. Excellent finish, dry surface without defects. Easily pigmentable. Transparent or colored decorative floors. colorless 100:50 25 84
EP1049

Two-component, self-leveling cycloaliphatic epoxy system, excellent self-leveling and high resistance to UV rays. Easily pigmentable.

Transparent or white decorative floors.

 colorless 100:46 30 80
EP1050

Self-leveling quartz epoxy system characterized by water rpellency, resistance to acids, alkalis and moisture. Recommended for self-leveling floors in thickness up to 3mm and multilayer.

Laboratories, chemical, pharmaceutical and food industries, warehouses and shopping centers.

  beige 100:40 (+quartz from 140 to 280) 60 / 100  65 / 78

 
EP1002

In a single product Primer and pigmentable Base-coat paint. Two-component water-based system.

 

Civil and industrial floor coating.

 white 3 : 7 60 - 90 80

EP1060

Transparent water-based epoxy finish. Good resistance to yellowing and scratching.

Topcoat and metallization.

 colorless 1 : 4 120 82

EP1070

Mortar three-component water based. Economic and strong.

Filling and repair of cement-based grounds.

 grey 65:85:1000 30 85

EP1090

Spatulable water-based putty. Tile joint sealant. Excellent mechanical properties.

 

Grounds and walls preparation.

 beige 9 : 80 45 78

PU1062

Water-based aliphatic polyurethane topcoat. Transparent product with superior UV stability. Available in a glossy, satin and matt version.

Civil and industrial flooring, micro-cements and parquet topcoat.

 colorless 100 : 25 60 80

Waterproofing membranes

code description application color

mix ratio

[pbw]

potlife

[mins]

hardness

[shore_D]

tech data sheet
EP1007 Two-component epoxy primer; contains a special hydrocarbon resin that gives water repellency. PU32001 waterproofing membrane primer. 

Pretreatment of cement substrates

 		  yellow 100:42  60   -  
PU32001

Two-component waterproofing membrane, 100% polyurea based, for manual mixing and roller application.

Waterproofing of terraces, flat roofs.

 red oxide 100:30  40  75 shore A