laminating
Cold curing epoxy resins
| code | short description |
mix ratio [pbw] |
viscosity [mPa.s] |
gel time [mins] |
flexural modulus [MPa] |
Tg [°C] |
tech data |
| EP500_H500 |
Two component epoxy system, unfilled, fluid, good flexibility and long working time, suitable for solvent-free coatings, lamination, pastes highly loaded, molds for polyurethane flexible and rigid. |
100 : 20 | 2200 | 80 | 2200 | 106 |
|
|
EP501_H501 EP501_H501s |
High temperature resistance, excellent wettability of synthetic fibers or fillers. Particularly indicated for the production of heat-resistant molds by laminating or casting of backfilling compound. |
100 : 25 100 : 25 |
600 600 |
60 90 |
2530 2620 |
99 107 |
|
| EP502_H502m |
Low viscosity, fast curing, superior quality epoxy system, characterized by excellent mechanical and dynamics properties. Particularly suitable for small and medium size composites. In nautical field is used for repair and renovation of boats. |
100 : 25 | 450 | 40 | 2820 | 93 |
|
|
EP501_H504std EP501_H504us |
Low viscosity and long processing times, excellent wettability and UV stabilized, designed for the production of big size composites. |
100 : 32 100 : 32 |
400 400 |
240 480 |
2780 2810 |
78 66 |
|
|
EP504LV_H504std EP504LV_H504std |
Very low viscosity, UV stabilized, long working times, excellent wettability. Designed for the production of big size composite, by infusion. |
100 : 42 100 : 35 |
180 150 |
240 480/540 |
2700 2830 |
72 60 |
|
|
EP504LV_H504F |
Very low viscosity, fast curing. System specifically designed for the production of glass fiber, aramid or carbon composite, by infusion. |
100:38 |
360 |
120 |
2810 |
97 |
 |
| EP504LV_H60 |
Very low viscosity, fast curing. |
100:38 | 240 | 24 | 2580 | 58 | |
| EP661_A/B |
Unfilled, epoxy system, characterized by high strength at elevated temperatures. Designed for use up to 230°C. |
100 : 40 | 9200 | 130 | 2900 | 212 |
|
| EP702_H504F |
Self-extinguishing epoxy lamination system. |
100 : 25 | 1080 | 105 | 2060 | 97 | |
| EP850_A/B |
Excellent mechanical properties after post-curing at moderate temperatures (80°C). Designed for hand layup, RTM, press molding composites. |
100 : 35 | 400 | 65 | 3030 | 80 |
|
| EP506_H3 |
Long working time, good mechanical properties, high chemical and thermal resistance. Designed for filament windings, laminates, casting compounds and tooling.
|
100 : 28 | 80 | 200 | 2310 | 158 | |
| EP506_H4 |
High reactivity, good flexural and compressive strenght, good chemical resistance.
|
100 : 50 | 350/650 | 30 | 2920 | 72 | |
| EP506_H5 |
Long working time, low exothermic peak and negligible shrinkage, excellent thermal resistance.
|
100 : 32 | 142 | 360 | 2290 | 180 | |
| EP506_H17 |
Very fast curing even at low temperatures, low sensitive to moisture. Suitable for quick repairing applications or as accelerator for epoxy systems. |
100 : 50 | 210 | 13 | 3260 |
77
|
|